Since earlier underground dog fence systems require that the wire used be buried, most people have been hesitant to purchase this kind of sytem. Although burying the wire is still recommended to avoid dealing with it over and over again., owners can still avoid the dirt and hassle that come with it.

Here’s an interesting and truly helpful product especially created for the needs.

Containment of the dogs using the underground dog fence will never be a problem again just because owners are renting the house, don't have the own yard, don’t have any tools or no one will dig the ground for owners. With the wire securing staples, all owners have to do is to lay the wire down and after a good rain the wire will sink and owners won’t be able to see it again. This is called above ground installation, a truly perfect hassle free solution to installation difficulties!

 

Below are the steps for above ground installation:

Step 1:

» First lay out the boundary wire in the desired shape and around the area owners want to contain. From the boundary wire run twisted wire to the transmitter and pug it in.
» Once owners have decide the system owners chose is correct for owners, "Staple" the twisted wire to the ground by hammering in a wire "Staple" every 5 - 6 feet.
» Now stop and look at the wire. Is it completely flush to the ground all the way to the start of the boundary? The wire MUST completely touch the ground. If not go and "Staple" any raised areas before proceeding to the next step.

Step 2:

» Place a "Staple" where the twisted wire and the beginning of the boundary meet (if owners have a splice in this area please dig a small hole about 2 inches deep and bury the splice. Then place a "Staple" in the front of and behind the splice to relieve any pressure on the splice)
» Next, walk to the first corner of the boundary and "Staple" it to the ground. Repeat this step for all corners of the boundary. (Not all yards are square if owners do not have corners on the boundary please select multiple anchor points for the wire)
» Now place staples as needed and make sure to staple any raised areas down until they are completely flush with the ground, for maximum safety for owners and the guests.